More Skyline work this morning.

First bit was reinforceing the rear subframe welds & bracket,
Then fitting an enerygy suspension snubber above the diff to take the load after the stock mount.
Shocks to the drivetrain break things & torque break things.
So the shocks i can the minimise, the 550ft-lbs on demand i cant :)




A quick glimpse of the steering rack im fitting to this car.
Using stock Gtr tie rods to match the original width.

08 Mazda rack with 2.7:1 turn ratio & 160mm stroke, Alot better than the 3.1 ratio & 140mm skyline rack, Making a much more go-kart like steering response, Giving a theoretic lock to lock ratio of 2.4 turns plus extra lock.